6 feet 37.9KHz (38KHz) Infrared Receiver Extender Cable, suit for TV sets, Video recorder, STB, Satellite Receivers, DVR etc, 3.5mm stereo plug

April 1, 2017 - Comment

This infrared receiver module for remote control system which is PIN diode and preamplifier series are assembled on lead frame, in order t realize the receiving and amplifying interference. The demodulate output signal can directly be decoded by a microrecessor.It may be used in TV sets, STB, video recorder, DVD, DVR, PVR, satellite receivers, air

Buy Now! $7.99Amazon.com Price
(as of November 20, 2017 8:44 pm UTC - Details)

This infrared receiver module for remote control system which is PIN diode and preamplifier series are assembled on lead frame, in order t realize the receiving and amplifying interference. The demodulate output signal can directly be decoded by a microrecessor.
It may be used in TV sets, STB, video recorder, DVD, DVR, PVR, satellite receivers, air conditioners etc.
Suit for IR data format: NEC code, R5 code, Grundig code, R-2000 code, RCA code, Zenith code, Sony 12-bit code.

Specification:
Carrier frequency: 37.9KHz (38KHz)
Peak wavelength: 940nm
Operating voltage Vcc: 2.7-5.5VDC
Operating current Icc: 0.9mA (typical) at Vcc=3V, 1.2mA (typical) at Vcc=5V
High output voltage VOH: Vcc-0.25V (min), 5V (max)
Low output voltage VOL: 0.25V (max)
Receiving distance: 20 meter (typical)
Horizontal half angle: +/-45 degree
6 feet shield cable
3.5mm stereo plug: Tip-Vcc 2.7-5.5VDC, Center-IR signal, Lower-Ground (Or, Tip=2.7-5.5VDC, Ring=Data, Sleeve=Gnd)

Product Features

  • Works with 38KHz (37.9KHz) carrier frequency and 2.7-5.5V supply voltage, low power consumption with RoHS compliant.
  • Please check your device with an active 3.5 mini input port labeled ‘IR’.
  • High sensitivity, Long receiving distance 20m (typical) from remote to IR receiver.
  • No external parts, inner shield, high reliability, TTL & CMOS compatibility.
  • High immunity against ambient light, power noise and electromagnetic interface.

Comments

Write a comment

*

Share with your friends









Submit